Adding Huawei Switch node on the NCE-Campus
First go to tab Design>Site Design>Site Management, then list site screen will appear:
![](https://tech.pansolusi.com/wp-content/uploads/2024/07/image-4.png)
in this case we use lab-30 site, it will open this screen site like this:
![](https://tech.pansolusi.com/wp-content/uploads/2024/07/image-5.png)
Click on Add device to add new device on the selected site, and it will appear this screen:
![](https://tech.pansolusi.com/wp-content/uploads/2024/07/image-6.png)
Set the option protocol type to NETCONF/COAP, and mode Device model. In this case we will add a switch model S5735-L24T4XE-A-V2 with role Access.
![](https://tech.pansolusi.com/wp-content/uploads/2024/07/image-7.png)
And after added to the list new device, we need to define the ESN of the specific device. The ESN can be collected on the switch with command display esn
in CLI mode. After it will done you have succesfully added the new device and wait the status switch to syncronized.
![](https://tech.pansolusi.com/wp-content/uploads/2024/07/image-8.png)