Here is the procedure and estimate time of the procedure: In this case we upload the patch file using Baby FTP server as source, and the switch as FTP client. Here, the username is anonymous with blank password, and setup the ftp working directory in the folder patch file exist. After that, start the service […]
Month: July 2024
Adding Huawei Switch node on the NCE-Campus
First go to tab Design>Site Design>Site Management, then list site screen will appear: in this case we use lab-30 site, it will open this screen site like this: Click on Add device to add new device on the selected site, and it will appear this screen: Set the option protocol type to NETCONF/COAP, and mode […]
Upgrading OS on the Huawei Switch
In this case we use CE6800 Huawei Switch Series, here is the list of action that need to do for upgrading OS/System Software on the Huawei Switch: Before the upgrade, use the terminal monitor command to enable the terminal to display logs, traps, and debugging information sent from the information center. In the user view, […]
Setup / Staging Huawei Device V600 OS before added to Huawei NCE Campus
This is a staging setup for the Huawei switch device V600 OS-based (Taishan OS) before being added to the NCE Campus Controller. First, we configure the Netconf feature in the switch (for connection to the NCE Controller). Then, we set the source interface for this Netconf connection type to the NCE controller. In this case, […]
SLX-OS version 18r bug
There is a bug regarding SLX version 18r. Whenever hslagtd daemon process is terminated by the system, it can cause initiation of the system to reload/failover for recovery. It is a bug related to the release note SLXOS ver 20.x Based on this release note point, the bug can be found in the switch that […]
Kubernetes Standarization
To standarize a Kubernetes Cluster,A Cluster must have this following:– Dynamic Provisioning Storage (NFS, or any backend storage)– Container Network Interface ( Calico/Weave)– Load Balancer Network Provisioning ( MetalLB)– DNS to resolve ( 8.8.8.8/<any>)– Containerd configured Below are the steps to setup all necessary requirements above.REQUIREMENTS TO RUN THIS GUIDE IS THE FOLLOWING:– MUST HAVE […]